Water hardness

TS16 Stockton On Tees

Near or below the UK average. Limescale builds slowly.

At 67 ppm, Stockton On Tees ranks near the UK's softest water areas — compare it against the hardest areas.

Slightly Hard 67 ppm North East Northumbrian Water
Your reading
67
parts per million
Soft
Moderate
Hard
Very hard
0100200300400+

What this means for your home

Based on 67 ppm in Stockton On Tees (slightly hard water).

  • Minor limescale may appear in kettles over time
  • Soap lathers reasonably well
  • Appliances generally unaffected
  • Good balance of mineral taste
Heat loss
1%
Minimal scaling
Softener salt
£4–7
per year
Worth it?
No
at 67 ppm
Suggested for slightly hard water
Filter jug (optional)
Mainly a taste preference, limescale won't be a real issue here.
From £20
Maintenance habits
Routine descaling once or twice a year is plenty.
Free
Softening

Should you soften the water in Stockton On Tees?

A verdict and running-cost estimate based on TS16's 67 ppm reading, for a typical 4-person household.

Softener optional

Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.

Recommended size
24k
grain capacity, regenerates ~every 40 days
Salt running cost
£4–7
per year (~14 kg salt)
Limescale
1%
est. heater efficiency loss. Minimal scaling
Soap saving
Minimal
Water is already soft, so there is little detergent saving from softening.

Appliance impact at 67 ppm: negligible: appliances reach full expected life. Sized for a 4-person home; regenerates roughly every 40 days (estimate). Figures are conservative estimates and vary with household size and usage.

Test Your Water in Stockton On Tees

At 67 ppm, your water is slightly hard. A home testing kit lets you verify the exact hardness and check for other contaminants.

TESPERT 16-in-1 Water Testing Kit

From ~£10

Home water test strips that check hardness, pH, chlorine, lead, and 12 other parameters. Results in around 60 seconds. 125 strips per pack.

View on Amazon
Water quality details

Hardness data for TS16

Sourced from Northumbrian Water's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)67
Degrees Clark (°Clark)4.7
Degrees French (°fH)6.7
Degrees German (°dH)3.8
Calcium (mg/L Ca²⁺)27

Supplier and area

Water supplier Northumbrian Water
Region North East
County Teesside
Hardness band Slightly Hard
UK average 207 ppm
Visit Northumbrian Water page
Official source
Northumbrian Water water-hardness report

This page explains local hardness and links to a postcode water quality checker so you can find your supply zone's level.

Nearby

Other areas near Stockton On Tees

TS15
Yarm
66ppm
Slightly Hard
TS17
Stockton On Tees
68ppm
Slightly Hard
TS18
Stockton On Tees
69ppm
Slightly Hard
FAQ

Common questions about TS16

What is the water hardness in TS16 Stockton On Tees?
The water in TS16 Stockton On Tees has a hardness level of 67 ppm (parts per million) calcium carbonate, classified as slightly hard. This is 140 ppm below the UK national average of 207 ppm.
Which water company supplies TS16?
TS16 Stockton On Tees is supplied by Northumbrian Water. Northumbrian Water serves the North East region.
Is the water in TS16 safe to drink?
Yes. Slightly Hard water at 67 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.
How can I reduce water hardness in TS16?
At 67 ppm, the water in TS16 is slightly hard and unlikely to cause significant issues. A jug filter can improve taste, but a water softener is generally not necessary.
What does 67 ppm water hardness mean?
67 ppm means there are 67 parts per million of calcium carbonate dissolved in the water. This is equivalent to 4.7 Clark degrees, 3.8 German degrees, or 6.7 French degrees. Water above 180 ppm is generally considered hard.
What size water softener do I need in TS16?
For a typical 4-person home at 67 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 40 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.
How much does it cost to run a water softener in TS16?
At 67 ppm, expect to use about 14 kg of salt a year, costing roughly £4–£7/year. Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.

Get TS16 Water Updates

We'll notify you when Northumbrian Water reports changes to water hardness in your area.

Check another postcode

Compare hardness across areas before moving or buying a softener.