Water hardness

SK23 High Peak

Near or below the UK average. Limescale builds slowly.

At 99 ppm, High Peak ranks near the UK's softest water areas — compare it against the hardest areas.

Slightly Hard 99 ppm North West United Utilities
Your reading
99
parts per million
Soft
Moderate
Hard
Very hard
0100200300400+

What this means for your home

Based on 99 ppm in High Peak (slightly hard water).

  • Minor limescale may appear in kettles over time
  • Soap lathers reasonably well
  • Appliances generally unaffected
  • Good balance of mineral taste
Heat loss
1%
Minimal scaling
Softener salt
£6–10
per year
Worth it?
No
at 99 ppm
Suggested for slightly hard water
Filter jug (optional)
Mainly a taste preference, limescale won't be a real issue here.
From £20
Maintenance habits
Routine descaling once or twice a year is plenty.
Free
Softening

Should you soften the water in High Peak?

A verdict and running-cost estimate based on SK23's 99 ppm reading, for a typical 4-person household.

Softener optional

Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.

Recommended size
24k
grain capacity, regenerates ~every 27.1 days
Salt running cost
£6–10
per year (~20 kg salt)
Limescale
1%
est. heater efficiency loss. Minimal scaling
Soap saving
Minimal
Water is already soft, so there is little detergent saving from softening.

Appliance impact at 99 ppm: negligible: appliances reach full expected life. Sized for a 4-person home; regenerates roughly every 27 days (estimate). Figures are conservative estimates and vary with household size and usage.

Test Your Water in High Peak

At 99 ppm, your water is slightly hard. A home testing kit lets you verify the exact hardness and check for other contaminants.

TESPERT 16-in-1 Water Testing Kit

From ~£10

Home water test strips that check hardness, pH, chlorine, lead, and 12 other parameters. Results in around 60 seconds. 125 strips per pack.

View on Amazon
Water quality details

Hardness data for SK23

Sourced from United Utilities's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)99
Degrees Clark (°Clark)6.9
Degrees French (°fH)9.9
Degrees German (°dH)5.5
Calcium (mg/L Ca²⁺)40

Supplier and area

Water supplier United Utilities
Region North West
County Cheshire
Hardness band Slightly Hard
UK average 207 ppm
Visit United Utilities page
Official source
United Utilities Water Ltd water-hardness report

Read the hardness explainer (most North West water is soft or very soft) and download the factsheet for conversion tables.

Nearby

Other areas near High Peak

SK22
High Peak
98ppm
Slightly Hard
FAQ

Common questions about SK23

What is the water hardness in SK23 High Peak?
The water in SK23 High Peak has a hardness level of 99 ppm (parts per million) calcium carbonate, classified as slightly hard. This is 108 ppm below the UK national average of 207 ppm.
Which water company supplies SK23?
SK23 High Peak is supplied by United Utilities. United Utilities serves the North West region.
Is the water in SK23 safe to drink?
Yes. Slightly Hard water at 99 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.
How can I reduce water hardness in SK23?
At 99 ppm, the water in SK23 is slightly hard and unlikely to cause significant issues. A jug filter can improve taste, but a water softener is generally not necessary.
What does 99 ppm water hardness mean?
99 ppm means there are 99 parts per million of calcium carbonate dissolved in the water. This is equivalent to 6.9 Clark degrees, 5.5 German degrees, or 9.9 French degrees. Water above 180 ppm is generally considered hard.
What size water softener do I need in SK23?
For a typical 4-person home at 99 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 27.1 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.
How much does it cost to run a water softener in SK23?
At 99 ppm, expect to use about 20 kg of salt a year, costing roughly £6–£10/year. Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.

Get SK23 Water Updates

We'll notify you when United Utilities reports changes to water hardness in your area.

Check another postcode

Compare hardness across areas before moving or buying a softener.