Water hardness

PO33 Ryde

Harder than the UK average. Expect visible limescale on kettles and taps.

At 240 ppm, Ryde sits among the UK's hardest water areas — compare it against the softest areas.

Hard 240 ppm South East Portsmouth Water

Your reading

240

parts per million

Soft

Moderate

Hard

Very hard

0100200300400+

What this means for your home

Based on 240 ppm in Ryde (hard water).

Significant limescale buildup in kettles, pipes and boilers
Soap scum on shower screens and taps
Higher energy bills from scale in heating elements
Dry skin and dull hair after washing
White residue on dishes and glassware

Heat loss

Moderate scaling

Softener salt

£14–23

per year

Worth it?

Yes

at 240 ppm

Suggested for hard water

Whole-house water softener

Best long-term protection for boilers and pipes.

From £600 installed

Shower head filter

A simple first step for limescale on tiles and glass.

From £25

Filter jug or under-sink

Improves taste and reduces kettle scale.

From £20

Softening

Should you soften the water in Ryde?

A verdict and running-cost estimate based on PO33's 240 ppm reading, for a typical 4-person household.

Softener recommended

Hardness is moderate to hard, so a softener cuts scale and soap use and usually pays back over its lifetime.

Recommended size

24k

grain capacity, regenerates ~every 11.2 days

Salt running cost

£14–23

per year (~49 kg salt)

Limescale

est. heater efficiency loss. Moderate scaling

Soap saving

Moderate

Noticeable saving: soaps lather more easily, cutting detergent use.

Appliance impact at 240 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 11 days (estimate). Figures are conservative estimates and vary with household size and usage.

Recommended

Products for Ryde

Popular choices for households dealing with hard water.

Splendid Twin Tank Water Softener

From ~£400

Twin-tank electric softener sized for 1 to 7 bedroom homes. Removes limescale from pipes, boilers, and appliances and delivers continuous soft water, with metered regeneration to keep salt use low.

View on Amazon

Philips Shower Filter

From ~£30

Quick win for skin and hair in hard water areas. Reduces chlorine and limescale, fits standard shower hoses in minutes, no tools needed. Cartridge lasts around 6 months.

View on Amazon

BRITA Marella Water Filter Jug

From ~£20

UK's best-selling filter jug. Reduces limescale, chlorine, and metals for better-tasting tap water. Quick first step alongside a softener.

View on Amazon

Water quality details

Hardness data for PO33

Sourced from Portsmouth Water's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)	240
Degrees Clark (°Clark)	16.8
Degrees French (°fH)	24
Degrees German (°dH)	13.4
Calcium (mg/L Ca²⁺)	96

Supplier and area

Water supplier Portsmouth Water

Region South East

County Hampshire

Hardness band Hard

UK average 207 ppm

Visit Portsmouth Water page

Official source

Portsmouth Water water-hardness report

Find your supply zone on the map, then download the matching PDF to read your average water hardness and quality results.

Nearby

Other areas near Ryde

FAQ

Common questions about PO33

What is the water hardness in PO33 Ryde?

The water in PO33 Ryde has a hardness level of 240 ppm (parts per million) calcium carbonate, classified as hard. This is 33 ppm above the UK national average of 207 ppm.

Which water company supplies PO33?

PO33 Ryde is supplied by Portsmouth Water. Portsmouth Water serves the South East region.

Is the water in PO33 safe to drink?

Yes. Hard water at 240 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.

How can I reduce water hardness in PO33?

For hard water at 240 ppm, a whole-house water softener is the most effective solution. You can also use a jug filter for drinking water, descaling products for appliances, and a shower filter for better skin and hair.

What does 240 ppm water hardness mean?

240 ppm means there are 240 parts per million of calcium carbonate dissolved in the water. This is equivalent to 16.8 Clark degrees, 13.4 German degrees, or 24 French degrees. Water above 180 ppm is generally considered hard.

What size water softener do I need in PO33?

For a typical 4-person home at 240 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 11.2 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.

How much does it cost to run a water softener in PO33?

At 240 ppm, expect to use about 49 kg of salt a year, costing roughly £14–£23/year. Hardness is moderate to hard, so a softener cuts scale and soap use and usually pays back over its lifetime.

Get free water softener quotes

Tell us about your home and we will match you with quotes for softening your hard water. No obligation, takes under a minute.

Check another postcode

Compare hardness across areas before moving or buying a softener.