Water hardness

HP13 High Wycombe

Harder than the UK average. Expect visible limescale on kettles and taps.

At 255 ppm, High Wycombe sits among the UK's hardest water areas — compare it against the softest areas.

Hard 255 ppm South East Thames Water

Your reading

255

parts per million

Soft

Moderate

Hard

Very hard

0100200300400+

What this means for your home

Based on 255 ppm in High Wycombe (hard water).

Significant limescale buildup in kettles, pipes and boilers
Soap scum on shower screens and taps
Higher energy bills from scale in heating elements
Dry skin and dull hair after washing
White residue on dishes and glassware

Heat loss

Moderate scaling

Softener salt

£15–25

per year

Worth it?

Yes

at 255 ppm

Suggested for hard water

Whole-house water softener

Best long-term protection for boilers and pipes.

From £600 installed

Shower head filter

A simple first step for limescale on tiles and glass.

From £25

Filter jug or under-sink

Improves taste and reduces kettle scale.

From £20

Softening

Should you soften the water in High Wycombe?

A verdict and running-cost estimate based on HP13's 255 ppm reading, for a typical 4-person household.

Softener recommended

Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.

Recommended size

24k

grain capacity, regenerates ~every 10.5 days

Salt running cost

£15–25

per year (~52 kg salt)

Limescale

est. heater efficiency loss. Moderate scaling

Soap saving

Moderate

Noticeable saving: soaps lather more easily, cutting detergent use.

Appliance impact at 255 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 11 days (estimate). Figures are conservative estimates and vary with household size and usage.

Recommended

Products for High Wycombe

Popular choices for households dealing with hard water.

Splendid Twin Tank Water Softener

From ~£400

Twin-tank electric softener sized for 1 to 7 bedroom homes. Removes limescale from pipes, boilers, and appliances and delivers continuous soft water, with metered regeneration to keep salt use low.

View on Amazon

Philips Shower Filter

From ~£30

Quick win for skin and hair in hard water areas. Reduces chlorine and limescale, fits standard shower hoses in minutes, no tools needed. Cartridge lasts around 6 months.

View on Amazon

BRITA Marella Water Filter Jug

From ~£20

UK's best-selling filter jug. Reduces limescale, chlorine, and metals for better-tasting tap water. Quick first step alongside a softener.

View on Amazon

Water quality details

Hardness data for HP13

Sourced from Thames Water's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)	255
Degrees Clark (°Clark)	17.8
Degrees French (°fH)	25.5
Degrees German (°dH)	14.3
Calcium (mg/L Ca²⁺)	102

Supplier and area

Water supplier Thames Water

Region South East

County Hertfordshire

Hardness band Hard

UK average 207 ppm

Visit Thames Water page

Official source

Thames Water Utilities Ltd water-hardness report

Read the hardness categories table to see where your supply falls; most of the region is hard to very hard at over 200 mg/l CaCO3.

Nearby

Other areas near High Wycombe

FAQ

Common questions about HP13

What is the water hardness in HP13 High Wycombe?

The water in HP13 High Wycombe has a hardness level of 255 ppm (parts per million) calcium carbonate, classified as hard. This is 48 ppm above the UK national average of 207 ppm.

Which water company supplies HP13?

HP13 High Wycombe is supplied by Thames Water. Thames Water serves the South East region.

Is the water in HP13 safe to drink?

Yes. Hard water at 255 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.

How can I reduce water hardness in HP13?

For hard water at 255 ppm, a whole-house water softener is the most effective solution. You can also use a jug filter for drinking water, descaling products for appliances, and a shower filter for better skin and hair.

What does 255 ppm water hardness mean?

255 ppm means there are 255 parts per million of calcium carbonate dissolved in the water. This is equivalent to 17.8 Clark degrees, 14.3 German degrees, or 25.5 French degrees. Water above 180 ppm is generally considered hard.

What size water softener do I need in HP13?

For a typical 4-person home at 255 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 10.5 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.

How much does it cost to run a water softener in HP13?

At 255 ppm, expect to use about 52 kg of salt a year, costing roughly £15–£25/year. Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.

Get free water softener quotes

Tell us about your home and we will match you with quotes for softening your hard water. No obligation, takes under a minute.

Check another postcode

Compare hardness across areas before moving or buying a softener.