Water hardness

DN11 Doncaster

Near or below the UK average. Limescale builds slowly.

At 166 ppm, Doncaster ranks near the UK's softest water areas — compare it against the hardest areas.

Moderately Hard 166 ppm Yorkshire Yorkshire Water
Your reading
166
parts per million
Soft
Moderate
Hard
Very hard
0100200300400+

What this means for your home

Based on 166 ppm in Doncaster (moderately hard water).

  • Noticeable limescale buildup in kettles and boilers
  • Soap may not lather as easily
  • Showerhead may need descaling periodically
  • Slight film on glassware after washing
Heat loss
4%
Light scaling
Softener salt
£10–16
per year
Worth it?
No
at 166 ppm
Suggested for moderately hard water
Filter jug (optional)
Mainly a taste preference, limescale won't be a real issue here.
From £20
Maintenance habits
Routine descaling once or twice a year is plenty.
Free
Softening

Should you soften the water in Doncaster?

A verdict and running-cost estimate based on DN11's 166 ppm reading, for a typical 4-person household.

Softener optional

Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.

Recommended size
24k
grain capacity, regenerates ~every 16.1 days
Salt running cost
£10–16
per year (~34 kg salt)
Limescale
4%
est. heater efficiency loss. Light scaling
Soap saving
Low
Some saving: expect to use slightly less soap and detergent.

Appliance impact at 166 ppm: slight: minor descaling extends kettle/boiler life. Sized for a 4-person home; regenerates roughly every 16 days (estimate). Figures are conservative estimates and vary with household size and usage.

Test Your Water in Doncaster

At 166 ppm, your water is moderately hard. A home testing kit lets you verify the exact hardness and check for other contaminants.

TESPERT 16-in-1 Water Testing Kit

From ~£10

Home water test strips that check hardness, pH, chlorine, lead, and 12 other parameters. Results in around 60 seconds. 125 strips per pack.

View on Amazon
Water quality details

Hardness data for DN11

Sourced from Yorkshire Water's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)166
Degrees Clark (°Clark)11.6
Degrees French (°fH)16.6
Degrees German (°dH)9.3
Calcium (mg/L Ca²⁺)67

Supplier and area

Water supplier Yorkshire Water
Region Yorkshire
County South Yorkshire
Hardness band Moderately Hard
UK average 207 ppm
Visit Yorkshire Water page
Official source
Yorkshire Water water-hardness report

Enter your postcode in the search tool to get the calcium and magnesium hardness level for your specific area.

Nearby

Other areas near Doncaster

DN10
Doncaster
165ppm
Moderately Hard
DN12
Doncaster
167ppm
Moderately Hard
FAQ

Common questions about DN11

What is the water hardness in DN11 Doncaster?
The water in DN11 Doncaster has a hardness level of 166 ppm (parts per million) calcium carbonate, classified as moderately hard. This is 41 ppm below the UK national average of 207 ppm.
Which water company supplies DN11?
DN11 Doncaster is supplied by Yorkshire Water. Yorkshire Water serves the Yorkshire region.
Is the water in DN11 safe to drink?
Yes. Moderately Hard water at 166 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.
How can I reduce water hardness in DN11?
At 166 ppm, the water in DN11 is moderately hard and unlikely to cause significant issues. A jug filter can improve taste, but a water softener is generally not necessary.
What does 166 ppm water hardness mean?
166 ppm means there are 166 parts per million of calcium carbonate dissolved in the water. This is equivalent to 11.6 Clark degrees, 9.3 German degrees, or 16.6 French degrees. Water above 180 ppm is generally considered hard.
What size water softener do I need in DN11?
For a typical 4-person home at 166 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 16.1 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.
How much does it cost to run a water softener in DN11?
At 166 ppm, expect to use about 34 kg of salt a year, costing roughly £10–£16/year. Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.

Get DN11 Water Updates

We'll notify you when Yorkshire Water reports changes to water hardness in your area.

Check another postcode

Compare hardness across areas before moving or buying a softener.